 |
Short publication (extended publication)
You don't have the profile and height distance data of the climb, but know the name and exactly where it is located? Then please continue below.
Please first check if the climb is not yet listed on climbbybike.
Next, fill out the necessary (*) the fields below and click on "submit climb".
On the next screen, you will be able to determine the exact position of the climb on a map.
You will, if you wish, also have the occasion to upload pictures. Go!
|
| General data climb |
Add location map |
Upload pictures |
|
|
|
|
advertisement |
|
|
Publication guidelines
How to get the profile data of a climb?
Its very easy, as long as you have a good bike computer. With any good bike computer, you should be able to download the height - distance parameters to your computer or to get the GPX data directly.
You don't have profile data?
No problem. Climbbybike has tools to generate a high-quality profile of your climb from your GPX data or from the Google Earth file that you can draw yourself via Google Earth. Publish your climb via the
GPX/Google Earth publication or download the 3D route builder via
hybridgeotools.com and publish through the excellent HGT-software.
You don't have a (good) bike computer?
There are several good bike computers which give you not only the correct distance but also the correct height at any given moment of your trip.
If you don't have one yet, you should certainly try to get one, cause it makes your cycling trips more fun. If you opt for a non-GPS bike computer, climbbybike advises the
HAC4Plus,
CM 436 ALTI M and
CATEYE CC-AT100.
You can buy these bike computers online in this shop at a very decent price.
If you're a regular cyclist, climbbybike advises a GPS bike computer like
Garmin Edge 705 (used by climbbybike) or one of the Garmin Edge series or
Garmin forerunner.
You do have a computer and height distance parameters. What next?
Once you have downloaded the data, you have the necessary height-distance parameters in order to create its profile. Creating a profile on climbbybike is very easy; there are 4 steps of which the first two
are required in order to have your climb published on climbbybike.
Step 1: General data climb (required)
fill out your personal data, including, if you have any, your web page address. Climbbybike will consider to publish your web
address underneath the new profile of the climb created by you. You may also use the profile you created on your own web page, once it has been published on climbbybike.
Step 2: Upload the GPX-data or kml/kmz-data OR create profile (required)
fill out the height and distance profile of the climb. You may use any scale you wish for the distance (e.g. 100 meter, 500 meter or 1 km), but it should be expressed
in KM (so, e.g. 0,1 KM). The height level should be expressed in meter.
Step 3: Upload pictures (not required)
upload your pictures if you have any. If you don't, please continue to step 4.
Step 4: Add location map (required in the short publication mode)
in the last step, you will be able to add the exact location (start and finish) of the climb through a map. Zoom in to find the
location of the climb and click to get the longitude and latitude values. Submit the location values to finish the complete publication process.
Control of your data
Climbbybike will check the data and profile before publishing your climb through approximative comparison of the profile with available satellite data.
|
|
|
| 
